

Structural table leg in raw steel, "Héraclite" design, which will allow you to create or personalize a bench, a coffee table, a high table, a desk
This foot is made from 5cm x 5cm square steel tube, drilled for attaching the top.
Several sizes are available.
The foot is made up of two uprights and the central bar.
The length includes the central bar with the width of the two tubes is 10 cm.
Each leg can support a load of 300 kg
If you have any questions regarding the laying or installation contact us!
Please note, as this is a made-to-measure work, the feet cannot be returned, check your dimensions carefully!
Free withdrawal in Angers
Satisfied or refunded
Free delivery from 250 euros in France (excluding Corsica)
Characteristics:
Handcrafted in France in our workshops
Can be fixed on all types of supports, wood, marble, stone, etc ...
Installation of the central bar on the side feet using fixing screws provided
Rough finish with anti-rust varnish (the anti-rust varnish serves as an adhesion primer and can thus be painted by you)
For outdoor use, we recommend that you apply a coat of rust inhibitor once a year (except at the seaside or with a saline climate, you must apply a second coat of varnish upon receipt).
6 mm fixing holes positioned every 10 cm
These feet are the result of craftsmanship and may have certain irregularities
Welds are sanded
We are at your disposal to answer questions regarding laying and installation
One foot weighs 7kg (for the 71 x 60 cm model)
Protective pads included to avoid damaging your floor
The price indicated is the price for one foot
Shipping costs at your expense
Delivery by Relais UPS and Chronopost, or for large feet by carrier
Free pick-up possible in Angers City Center
For international delivery, contact us